|
Flow Diagram:
Technical Data:
| Reactor
Vessel |
|
Motor |
|
Vapor
Duct |
- Mechanical
shaft seal
- Coverplate with 8 openings:
- Glass lined retreat curve
impeller
- Glass lined baffle with RTD
- Hand hole / Solids feed port
- Vapor duct
- Liquid feed inlet
- Distillate return
- 2 spare openings with plug
- DN400 glass cylinder
- Glass lined jacketed bottom
section with thermal insulation
- Nominal volume 100 liter
- Total volume 107 liter |
|
- 3 phase 208/230-460V /
60Hz
Explosion proof Class 1, Div 1
Groups C & D, 1.0 HP
- Manual stepless adjustable
speed transmission 0-390 Rpm
- Mechanical speed indication
|
|
- Vapor duct
with:
- PTFE coated rupture disc
- RTD for vapor temperature
- 1 spiral condenser 1.3m2
- 1 vent condenser 1.3m2
arranged horizontally
- Phase separator with RTD
- Return line to reactor with
swing siphon and valve
- Connection to receivers with
swing siphon and valve
- Ball valve to drain separator
|
|
Drain
Valve
|
- Flush mounted drain
valve
- Armour coated glass body
- PTFE stem
- Outlet with 1 1/2" hose barb
|
| Feed
Tank |
|
Receivers |
|
Vacuum
Manifold |
- 20 liter graduated round flask
- Vacuum connection
- Liquid feed line to reactor with
valve
- Fill line with valve
|
|
- 2x 20 liter round flask
- Vacuum connection
- Condensate inlet with valve
- Gas inlet with valve
- Drain valve
|
|
- Vacuum line to feed tank
with
valve
- Vacuum lines to receivers
with valves
- Vacuum line to condensers
- Vacuum/pressure gauge
|
| Frame |
|
Permissible
Operating Conditions |
- Stainless steel
scaffolding
with stainless steel clamps
and supports for reactor
vessel and all glass parts
Height x Width x Depth
2520 x 2200 x 1120mm
99 x 87 x 44" |
|
- Operating temp. in
reactor jacket
- Operating temp. in plant
- Operating temp. in condenser spirals
- Operating pressure in reactor jacket
- Operating pressure in plant
- Operating press. in condenser spirals
|
-60...+200ºC,
-85ºC optional
-50...+200ºC
-50...+200ºC
-1...+10 bar/FV...145 psig
-1...+0.4 bar/FV...6 psig
-1...+3.0 bar/FV...+44psig
|
|
Options:
Looking for a different size ? Click
here !
Many options are available for these
systems, some of which are listed below. Chances are, that if you don't
see it here we can still make it in order to suit you needs. All
of our standard reactor systems can be modified to your specification.
In fact, most of the reactors we sell are customized in one or the other
way.
- Second feed tank
- Vacuum exhaust piping
- Liquid sampling system into
a sealed container
- Gas inlet tube into reactor vessel
- Temperature measurement
- Vacuum / pressure measurement
- Speed measurement
- pH measurement
- Gas
scrubber
- Glass filters
- Heating
cooling units
|
| Lifting
device for vessel |
|
This option makes it very
easy to open the reactor vessel for easy cleaning
access. It's operated by a manual hand crank and the
vessel is suspended from steel cables. |
|
|
|
 back
to top |
All rights reserved,
Chemical Transfer Partnership Corporation |
|
We accept the following
credit cards
Call 631-912-2300 ext 21 for more details on
credit card payments. |
|
|
|
